11A22555 180" Wide by 84" Tall ShadowCube Fabric Hospital Curtain / Cubicle Curtain, Anti Microbial, Anti Bacterial, Choose Mesh Top or Solid Panel, Choose Color CCF brand W180xH84-ShadowCube

84" Tall by 180" Wide Shadow Cube Pattern Hospital Curtain / Cubicle Curtain, Choose Mesh Top or Solid Panel, Choose Color

Item# 11A 22555

---

Important Note: Curtains are a custom made to order product.  These curtains have a 2-4 week lead time and can not be canceled after 24 hours. Curtains are NON-RETURNABLE.

The Shadow Cube fabric is a very nice tone on tone material with a nice texture cube pattern and clean look. Click on the images above for a high resolution image that shows the color and pattern texture in detail.  

These hospital cubicle curtains are made in the USA and made from material produced in the USA. 100% American Made!

Please read our "Curtain Ordering Help Page" for help on determining what size curtain you need.  If you need additional help our customer service team is available at 1-800-804-9549 8am-5pm CST to answer any questions you may have.

• There is a 2-4 week lead time before these curtains ship out.
• Choose your color in the selection box above.
• Curtains can be ordered with mesh at the top or as a solid panel. Choose your desired style in the selection box above,
• This is a custom made item and no returns are accepted.
• 100% Flame resistant, antimicrobial polyester.
• If you choose the mesh top curtains - the top 20" is mesh material.
• There will be a horizontal seam in most curtains.  The max width of the material we can buy is 72" so to get a taller curtain than 89" we have to seam the material. This is an industry standard practice. The seam is very nicely finished and not very noticeable but we want you to be aware it is there.
• The curtains are a heavy dimensionally stable, soil release 100% polyester material.
• These curtains are not the light linen (bed sheet material) type curtains, they are made of heavy duty industrial material.
• Heavy duty grommets every 6", center to center across the top of the curtain. The grommets have a 3/8" I.D., 5/8" O.D. and 1/2" from the top of the curtain to center of the grommet.
• You can see light through the material if it is a strong back-light, but it is not transparent
• Add 20% to your curtain width to get the proper fullness or bunch. For example; If you have a 120" (10 foot) hole to cover multiply 120" x 1.2 = 144" wide so you would need to order a 144" wide curtain to fill the hole properly.
• Complies with NFPA 701-1996 Method I fire resistance standards.
• Please measure and order carefully - there are no returns on curtains.

Care Instructions: 

• Wet cleaning: Use mild soap or detergent in warm water, not to exceed 160F (synthetic setting). Use high water level with mild agitation. Extract gently. DO NOT BLEACH.
• Drying: Air, cabinet or tumble dry at low temperature. Do not exceed 3 to 5 minutes on synthetic cycle at maximum of 140?F. Hang or fold immediately after drying.
• Finishing: If necessary, press as follows: Hand iron at low heat setting (275?F) with damp press cloth or steam iron with dry press cloth.
• Grid Head Press - press for short intervals with minimum steam. Do not lock head.
• Flat Bed Press - press dampened drapery using cloth covering. Do NOT press SNAPS, HOOKLESS RINGS or MESH. AVOID PROLONGED CONTACT WITH HEAT.